BK Fire Radios

KNG Mobile Radios — Dash Mount

KNG Dash Mount Mobile Radios

Dash-mount configuration integrates the full radio head unit directly into the dash or console — the most common install for fire apparatus, command vehicles, and utility trucks.

KNG dash-mount mobile radio installed in fire apparatus

Available Models

Four Frequency Bands — Dash Mount

KNGM150VHF
Freq: 136–174 MHzChannels: 5,000Power: 50–100 WattsStandard: P25 Phase 1 (FDMA)
Dash Mount
$3,332

You will need Cable, Control Head, and Mic. Scroll Down.

Get a Quote
KNGM400UHF
Freq: 380–470 MHzChannels: 5,000Power: 40–50 WattsStandard: P25 Phase 1 (FDMA)
Dash Mount
$3,332

You will need Cable, Control Head, and Mic. Scroll Down.

Get a Quote
KNGM500UHF
Freq: 440–520 MHzChannels: 5,000Power: 40–50 WattsStandard: P25 Phase 1 (FDMA)
Dash Mount
$3,332

You will need Cable, Control Head, and Mic. Scroll Down.

Get a Quote
KNGM800800 MHz
Freq: 763–870 MHzChannels: 5,000Power: 35 WattsStandard: P25 Phase 1 (FDMA)
Dash Mount
$3,332

You will need Cable, Control Head, and Mic. Scroll Down.

Get a Quote
Dash MountRear Mount

The Standard Apparatus Install

The KNG dash-mount radio mounts the entire unit — head and body together — directly in the dash or console of the vehicle. This is the most straightforward installation for fire apparatus, offering a clean, integrated look with all controls at the operator's fingertips.

All four frequency bands — VHF, UHF, and 800 MHz — are available in dash-mount configuration. Programming, channel plans, and P-25 interoperability are identical across all models.

KNG dash mount mobile radio installed in fire apparatus

Why Choose Dash Mount

Integrated Install

The entire radio unit mounts in the dash or console — no separate control head cable runs, no remote mounting hardware required.

All Controls at Hand

Volume, channel selector, and keypad are directly in front of the operator — no reaching for a remote head or secondary panel.

Fastest Deployment

Simpler wiring and fewer components mean faster installation and easier troubleshooting in the field.

Standard Apparatus Fit

Designed to fit standard DIN-size dash openings found in most fire apparatus, command vehicles, and utility trucks.

Full P-25 Performance

P-25 Phase 1 interoperability, 5,000 channels, and MIL-SPEC durability — same performance as the rear-mount models.

All Four Bands Available

VHF, UHF (two ranges), and 800 MHz dash-mount models available — choose the band your agency operates on.

Key Specifications

Frequency Band

VHF / UHF / 800 MHz

Channels

5,000

Power Output

35–100 Watts

P-25 Compliance

Phase 1 (FDMA)

Operating Voltage

12 Volts Negative Ground

MIL-SPEC Rating

MIL-STD-810 C/D/E/F/G

Mount Type

Dash Mount (integrated head)

Control Head

Integrated — full unit in dash

Required Add-Ons

Cables, Control Heads & Microphones

Complete your dash-mount install with the right control head cable, microphone, and mounting hardware. Select accessories below.

Aux. / Speaker Cable Assembly

Aux. / Speaker Cable Assembly

KAA0647

Included with KNG Base & Mobiles

External Speaker 20W

External Speaker 20W

KAA0261

Handheld Standard Microphone

Handheld Standard Microphone

KAA0276

For KNG Mobiles

Handheld Programming Microphone

Handheld Programming Microphone

KAA0290

For KNG Mobiles

Ready to Configure Your Dash-Mount Install?

Tell us your apparatus type, frequency band, and channel plan. We'll spec out the right KNG dash-mount package — programmed and ready to install.

Share: